Faber 3117-0 Plus USA/ABR-1 Insert Bridge Studs Nickel Finish

Our PLUS USA/ABR-1 conversion posts replace the original sloppy bridge bushings and integrated posts. The Faber GERMAN BELL BRASS one piece bushing/post, with separate thumb wheels like the original ABR-1 system, will enhance the tone, sustain and resonance of your guitar! These superior posts are threaded, unlike the unthreaded upper portion of the original posts. The threading allows the installation of the Faber Tone-Lock bridge. These posts also allow the installation of the advanced no wire Faber ABRH bridge, or you can use your original Gibson ABR-1 bridge.

• Material: Studs, Steel, plated; Thumbwheels, Brass, plated
• Weight, with thumbwheels: .75 oz./21.3g
• Overall length: 1.25 / 31.75mm
• Length below flange: .55 / 14.0mm
• Post length, above flange: .59 / 15.0mm
• Post Thread pitch 6-32 (ABR-1)
• Diameter, lower section: .276 / 7.0mm
• Flange diameter: .375 / 9.5mm
• Flange thickness: .061 / 1.55mm
• Thumbwheels: Diameter .63/16mm; Thickness .11/2.8mm